Intro to Routing with Lab

NETW204_week_1_quiz_1.docx.docx-Question 1 0 / 1 pts

NETW204_Wk7_Quiz.docx.docx-Question 1 2 / 2 pts

W6_Quiz.docx.docx-TCO 6) What function describes the

NETW204_H.docx.docx-HOMEWORK ASSIGNMENT Week 4 30 Points

HOMEWORK ASSIGNMENT Week 3 30 Points Maximum Name ______________________________________ NETW204 Homework #3 Due Date _____________________________________ Professor ______________________________________ Inter-VLAN Routing 1. A Given the network diagram below. Enter the commands, including the router prompt, to conﬁgure the router, for router-on-a-sck. ( 10 points ) R1#confg t R1(confg)#interFace Fa0/0.5 R1(confg-iF)#encapsulaTon dot1q 5 R1(confg-iF)#ip address 172.16.5.0 255.255.255.0 R1(confg-iF)#interFace Fa0/0.7 R1(confg-iF)#encapsulaTon dot1q 7 R1(confg-iF)#ip address 172.16.7.0 255.255.255.0 R1(confg-iF)# interFace Fa0/0 R1(confg-iF)#no shut R1(confg-iF)#end 2. Given the network diagram below. Enter the commands, including the switch prompt, to conﬁgure S1 to forward VLAN traﬃc. ( 10 points ) SW1#confgure terminal SW1(confg)#interFace range F0/5,12 SW1(confg-iF)#switchport mode trunk SW1(confg-iF)#switchport trunk allowed vlan 5 SW1(confg-iF)#exit SW1(confg)#interFace range F0/6,10 SW1(confg-iF)#switchport mode trunk SW1(confg-iF)#switchport trunk allowed vlan 7 SW1(confg-iF)#exit 3. The organizaon added a new VLAN, VLAN 200, to the network. You are required to implement a soluon that provides the best performance to the server segment, VLAN 200. How would you conﬁgure the router to ensure that the server segment will not experience boleneck between the end devices on the server segment and the router? Enter the commands you would use on the router to implement this soluon. Jusfy your answer. ( 10 points ) R1#config t R1(config)#interface fa0/0 R1(config-if)#encapsulation dot1q 5 R1(config-if)#ip address 172.16.5.0 255.255.255.0 R1(config-if)#interface fa0/0.7 R1(config-if)#encapsulation dot1q 7 R1(config-if)#ip address 172.16.7.0 255.255.255.0 R1(config-if)#interface fa0/0.200 R1(config-if)#encapsulation dot1q 200 R1(config-if)#ip address 172.16.200.0 255.255.255.0 R1(config-if)#interface fa0/0 R1(config-if)#no shut R1(config-if)#end SW1#configure terminal SW1(config)#interface range f0/5,12 SW1(config-if)#switchport mode trunk SW1(config-if)#switchport trunk allowed vlan 5 SW1(config-if)#exit SW1(config)#interface range f0/6,10 SW1(config-if)#switchport mode trunk SW1(config-if)#switchport trunk allowed vlan 7 SW1(config-if)#exit SW1(config-if)#interface

All courses in NETW

Popular Documents